Tag: auto and moto

The Hub

Through this, they better take sides load, but you must expect more wear and tear. The decisive factor for the longevity of ball bearings is the diagonal force constant torque, which in turn depends on the geometry and accuracy podhozhdeniya components, as well as from the torque of the central nut. The first generation of diagonal ball bearings were double-row type, and its external clip pressed into housing corresponding element of vehicle suspension. In an internal holder factory of wheel hub. Due to tolerances in the manufacture, improper torque and as a result of additional mechanical stresses wheel bearing of this type were subject to premature wear. Because of engineering for research and development was to reduce the number of stages during the mechanical assembly in a workshop that is to increase number of parts that are mounted directly on the job. This led to what was introduced integrated unit bearings. Learn more on the subject from XOM.

At the same time tightening the bearing accurately exposed during the manufacturing process and does not change operation. As such, the bearings are fed to the service station or repair shop. These modules contain elements of the hub or cage speed sensor system ABS. This generation stupichnyh bearings already in the series on many models. It has also been used frequently can be found embedded in the bearing housing of the magnetic elements, which will perform the role of polar ring sensor ABS. Lubricants. Means grease in the bearing (grease) is an essential structural element. Its objective is to reduce friction and corrosion and contamination effects of the environment.

Renault Logan

Remove the radiator system cooling. Detach from the thermostat housing, the exhaust pipe of the cylinder head and pipe water pump cooling system hoses. Ignition Coil Renault Logan free from harness pads wire engine management system, idling regulator, fuel injectors, solenoid valve and canister purge sensors: oxygen, detonation, and the absolute air pressure air temperature in the intake pipe, signaling the lack of oil pressure, coolant temperature, crankshaft position, throttle position. Allot wiring harnesses from the engine side. If the engine is supposed to be removed from the engine compartment up with a lifting device, you first need to remove the gearbox.

Raise the hood on the Renault Logan and hold it vertically position. Fasten the chain hoist to the engine mounts. Pulling the chain, we remove the stress from the engine, which had supported him when removing the gearbox. On the right pole of the power unit remove the holder canister purge tube and allot up to one side, remove the extension and turn away the two screws attaching the right support to the body. Before removing the engine, you need to check again that all hoses, pipes, wires disconnected from the engine and taken away.

With the help of winches raise and remove the engine from the engine compartment. If the work is done on a lift and remove the power unit down, the generator is not dismantled need – just unplug it from the wire. You can also disassemble the engine power steering pump and air conditioner compressor, and a disconnect from their pipes and hoses. When removing powertrain operations, instead of lifting gear must perform the following work. Remove the front wheel drive. Disconnect the cable from the drive clutch fork clutch mechanism and bracket on the gearbox. Disconnect the traction control transmission of the transmission shift rod. Disconnect the "mass" and the wire harness from the transmission. Remove the speed sensor. Detach block of wires from a light switch reverse. Set up under the engine and gearbox adjustable stops or sturdy table. Remove the right-hand pillar of the power unit. Turn away nut left support power unit to the bracket support. Remove the engine. Set the engine or power plant on Renault Logan in reverse order.

Hello Lucky Winner

Your car is true to you, often rescued by you, creates a feeling of safety, comfort, but you make it forces have been working hard, to squeeze out of it all to the maximum and there comes a point when your iron horse requires repair. Here, Slingbox expresses very clear opinions on the subject. You are you taking your car to the service station, or decide to replace the damaged parts myself … where is better to purchase them? Markets for natural quality and country of manufacture are classified as agent of the FSB, and there are no guarantees! Remain auto parts stores. First, these shops engaged in selling spare parts approved manufacturer, and secondly, you give a guarantee on purchased goods, and third, you can use the advice competent professionals, and, finally, you can always change incorrectly matched parts. Recently, auto parts stores have opened online stores that you will agree, it is convenient. Buy Parts foreign cars or domestic cars has become easy and profitable. Need to travel about disappeared different corners of the metropolis in search of the necessary spare parts. Another advantage is the ability to buy auto parts around the clock ..

Appeared many specialized online stores of spare parts for cars, for Japanese cars, shops for spare parts ford, hyundai, kia … The shops that sell spare parts, you can find any car you need spare parts for cars of all types. I recently came across online auto parts store, specializing in the sale of auto. What it interesting? Simply pleased range! So do not waste your time and nerves in the search for the right details, just turn on the monitor, look for the right and only then go for buying the necessary parts. As the saying goes, no nails, no wand! Your car is true to you, often rescued by you, creates a sense of reliability, comfort, but you make it working as hard as the forces to squeeze out of it all to the maximum and there comes a point when your iron horse in need of repair. You are you taking your car to the service station, or decide to replace himself damaged parts ..

Forklift Trucks

It is hard to imagine a modern warehouse with no such car as a forklift. This type of machinery to effectively cope with the tasks of the movement of many types. Further expand the scope of forklifts You can use the attachment. On one of these extensions – forklift extension cords – the focus of this article. There are many reasons why the extension forks for forklift trucks are an indispensable tool for sites with large amounts of loading operations, such as a warehouse or other storage area. The main and the main reason is the possibility of lifting the overall length "legs" forklift. It is possible to lengthen the forks up to 50% -60% of maximum.

This allows the operator to cope with increased loads with a standard forklift. Longer forks mean that the subject raised at the wheel, has greater stability, and it is less likely to tip over during transport. Thereby reducing the chance of tipping load, you can increase the overall security of your forklift and reduce the likelihood of costly damage to a fallen load. There are enough different extensions for the fork truck, including the options of special shape, with square or round profile. These extensions designed for more stable movement of different cargoes. With the help of extension cords with round section, forklift can easily cope with bales and bales, and eliminate the possibility of relapse goods with standard forks. And with a triangular cross-section extensions forklift can cope with loads of unusual shape and move them safely.

Extension cords are made of twisted stainless steel with cast tips that would ensure the long term and reliable operation. Almost every forklift truck can be equipped with such extensions fork, and extension cords themselves can be installed very quickly. Set Extension forks on a forklift is quite simple. They are easy to place, sliding along the existing forks and securely fastened for safe operation. When extension cords are no longer needed, they are as fast and as easy to remove one person and are mounted on the forklift frame until the next use. In addition to the stability and flexibility that acquires forklift fork extensions during installation, you can buy polyurethane coating for the pitchfork, for their protection. These cases will help to hide the sharp corners of forks, thus minimizing the risk of damage to anything at the moment. At the same time it allows forklift to work with sensitive cargo. More on the topic can be found at loaders for all occasions

Car Rental

Car rental car rental for the first time, as well as many others, appeared in the , and existing and cars that are available to the general population, started to produce there. Starbucks might disagree with that approach. The slogan of the U.S. car rentals 20s years were the words of one of the pioneers of this business of German immigrant Gustav Hassel "pay only for the benefit." By these words meant Hassel the fact that all the costs of storage, providing technical state vehicle registration documents and payment of taxes on car borne by the owner – that is, office rental cars, and the customer only pays for those services that are acquired. Why do I need such a service? Imagine yourself in the city where you come for only two or three days. List of meetings, which must find time and places that are worth a visit, just endless, and time for all is clearly not enough. What should I do? Taxis can be found not always in addition, pay for full-time taxi driver at the usual tariff is quite expensive, and if want to just sit in the car and collect your thoughts? In this case, the car rental is the perfect option.

The car, rent allows you to move quickly from one point to another without thinking about that at a meter you can safely stay in any place to deal with papers, call in for lunch or simply to rest, not thinking about the time or money – the car will stand up and "wait" for your car rental scheme further action has been very tenacious, and has spread around the world. There are two types of rental cars – with or without driver. The first is very similar to a taxi: the only difference is that the service is not limited mileage, time and rental cars. In the second case, the client – is his own master, and drive on your own risk. Another aspect of the rental is a limit run. In most cases, companies offer service plans that limit the range (cheaper) and do not limit the (expensive). This rate schedule allows each client to find a profitable rate for themselves. There are also companies that do not limit the mileage on tariff plans, however, as experience shows, it is not always advantageous: rent a car in such cases is more expensive.

Statistics Moscow Taxi

Nevertheless, the available information about the number of officially registered taxi in Moscow is on the different data from 5 to 7000. While the share of private traders have an average of 50 thousand cars. Due to the fact that the price travel by private carters below, they are tough competition legal taxi companies. Now on the 1000 legal taxis have 8-10 thousand privateers. And even the adoption of the law "On taxi in Moscow," while not significantly change the situation. If you take the weekly performance of help desk calls a taxi for 100%, the lowest point falls on Wednesday, the day turns to take a taxi about 7% of passengers. Douglas Oberhelmans opinions are not widely known. And the most popular day to call a taxi – Saturday and Sunday, they account for 20 to 22% of customer orders. The number of appeals in the service taxi also increases and holidays.

The peaks of applications on time of day accounted for 7 am and 7 pm. The time when people go to work and back with her. During the holidays, the maximum number of applications in the taxi accounts for about 10 hours in the evening. As for the cost of a taxi service – some 20 minutes of movement to Moscow will cost an average of 300 rubles., and the road to the airport will cost Muscovite from 900 to 1500 rubles. It should be noted that due to the difficult economic situation in the country, many companies are forced to reduce tariffs from 10-20%. Some taxi companies reduce value only at night. Thanks to the exit of small taxi companies, large number of orders increased, due to a general decline in demand for this type of service, revenue growth compared to 2008 do not exceed 10-15%. It is expected that the annual market volume of passenger traffic light will be similar to 2008.