To the operation of air screw compressor “Storm” had no problems, it is important to clean the intake air. However, with the air coming into the compressor, there come a variety of small particles. Resulting in premature wear of the screw block. Filter media in air filters compressors “Storm” is very high mechanical strength. They filter the intake air efficiently and reliably. This ensures stable operation of the screw pair. Air filters perform many important functions. They filter from the intake air abrasive particles such as dust, sand, soot and water droplets.

They provide a hit in the screw block only clean air benefits of air filters compressors “Storm”: Warranty Lifetime special structure of the special filter paper for maximum cleaning of air with low resistance to flow; 100% integrity, in particular with reliable attachment of the filter blinds adhesive compound; Optimal corrugation geometry reliability even in extreme conditions; Continuous quality control standards in all production. To ensure reliable and high quality of the screw oil-filled unit used oil filters, providing a high degree of purification of oil. Only clean oil can ensure the stability of the performance of the screw block. The problem of oil filter – to remove particles that are suspended in oil. If the oil is not cleaned properly, dirt quickly find themselves on the surfaces of the walls of the screws. In the oil circulation system, oil filter installed so that the entire flow of oil passed through the filter.

As the filtration material used paper impregnated cellulose-based content with the finest plastic fibers, which gives a high fineness treatment at high absorption capacity. The device is resistant to corrosion and pressure hull. High quality seals ensures sealing the filter and the complete isolation of purified oil from contamination. The advantages of oil filters used on the compressors “Storm”: – the absolute density between the parties and the purified oil pollution – a reliable O-ring – high degree of purification of oil – high gryazepogloschayuschaya ability – low flow resistance – long life – high heat resistance – resistance to vibration – the metal parts with extremely high protection against corrosion, oil filters, mounted compressors “storm”, to be replaced after 4000 hours. The design of the compressor provides a quick and easy filter replacement.