SNS-2 instrument designed to measure the gel strength PSNS mud. It is used in oil and gas industry in commercial laboratories. Jonas Samuelson is full of insight into the issues. The basic parameters of drilling solution include: density, maximum static and dynamic shear stress, effective, and the plastic viscosity, relative viscosity, the rate of filtration, static stress in the clay crust gas content, sand content, an indicator of stability, the rate of the lubricating ability, the breakdown voltage of hydrophobic emulsion, the concentration of hydrogen ions (pH), solids content and oil content colloidal particles, the degree of mineralization of leachate, the content of calcium, magnesium, carbonate, bicarbonate, chloride, sulfates, alkali metals, chromium, potassium, and lime. Gel Strength characterizes the strength of the structure of the mud after 1 min of rest. At normal temperatures the limiting static shear stress measured by the instrument SNS-2. SNS-2 instrument designed to measure the limiting gel strength of mud. It is used in oil and gas industry in commercial laboratories and in field conditions on drilling.
Easy to use. Has an optical viewfinder. Filament diameter of 0.3 mm. performed corrosion-resistant steel. Specifications: Used in oil and gas industry in commercial laboratories and drilling. The design of the instrument SNS-2 provides more accurate readings and easy to operate. Measurement range, mg / cm – with a diameter of thread 0.3 mm (4 to 30) – with a diameter of thread 0.4 mm (14 to 100), – with a diameter of thread 0.5 mm (38 to 250) . Allowable duration of measurement – 60 sec. The speed of rotation of the outer cylinder – 0.2 r / min. Scale – 1 deg. The measurement accuracy of range,% 2 Power motor voltage, V 220 diameter of the outer cylinder, 60 mm diameter suspended cylinder, mm 40 Height suspended cylinder, 60 mm Scope of delivery: instrument SNS-2, 6 graded threads (2 threads of all sizes), a mug, a screwdriver, calibration ring, a passport, the instruction manual.